WHERE TO BUY  |   SITE MAP  |    CONTACT US  
 

CONVERGENT NETWORKS
Climax
  ---  Climax960
      Specifications
      Modules
     White Papers
     Management Software
  ---  Climax800
  ---  Climax900e
  ---  Climax950
  ---  Climax2000
---  Video Framer
¡¡Convergent Networks

Climax960

Next Generation Access Solution

Asce networks' Climax Series delivers the industry's first multiservice platform that integrates data, voice and video over today's WAN technologies (ATM, IP, Frame Relay, and ISDN). The Climax960 offers GSM Providers a low-cost solution for interconnecting remote GSM nodes.

Key Features
High Quality Voice
Capacity
Flexibility
Integrated Wireless Services
Bandwidth Optimization

Voice
 Up to 60 Digital Voice/FAX channels
 Encoding Schemes supported:
¡¡¡¡¡¡¡¡- CS-ACELP G.729 (8 Kbps) Annex A & B
¡¡¡¡¡¡¡¡- ADPCM G.726 (16, 24, 32 & 40 Kbps)
¡¡¡¡¡¡¡¡- PCM G.711 (64 Kbps)
¡¡¡¡¡¡¡¡- Transparent G.723 (5.4, 6.3) over IP
 Vocoder negotiation:
¡¡¡¡¡¡¡¡- G.729 A/B (CS-ACELP),
¡¡¡¡¡¡¡¡- G.726 (ADPCM) and G.711 (PCM)
 G.168 Echo cancellation
 supports 64ms echo tail and multiple echo path cancellation:
 Silence suppression:
 Analog voice:
 up to 8 voice/FAX ports, FXS, FXO or E&M (2- and 4-wire):
 Digital voice signaling supported:
¡¡¡¡¡¡¡¡- SS7transparent
¡¡¡¡¡¡¡¡- ISDN Q.931
¡¡¡¡¡¡¡¡- Switched Q.SIG
¡¡¡¡¡¡¡¡- MFC-R2
¡¡¡¡¡¡¡¡- CAS
¡¡¡¡¡¡¡¡- CCS transparent

GSM
 WAN protocols (Frame Relay, ATM, IP and ISDN) support bridging of GSM Networks
 Compresses voice channels on A-interface up to 8 to 1 ratio
 Bridges SS7 signaling channels transparently
 SS7Spoofing feature reduces signaling overhead
 SMS (Short Message Service) support
 V.110 support enables Fax and Data applications to have wireless access to Internet services

LAN
 Ethernet 10BaseT, 100BaseT
 oken Ring 4/16 Mbps STP/UTP
 IP, IPX, STP bridging, SR bridging, PPP
 RIP, RIP2, OSPF, BootP, DHCP Relay and VRRP

IP
 VoIP(H.323) gateway support
 IP tunneling support
 IP QoS (IP Differentiated Services)
 Traffic prioritization and filtering mechanisms

ATM
 UNI 3.1 and TM 4.0
 ATM Adaptation Layer 5 (AAL5)
 CBR, VBR (nrt and rt) and UBR services
 OAM ITU-T I.610
 QoS
¡¡¡¡ ¡¡¡¡- Advanced traffic management techniques
 AToM MIB (RFC-1695) support
 Frame Relay Internetworking Services:
¡¡¡¡ ¡¡¡¡- FRF.5 FR/ATM Network Interworking
¡¡¡¡ ¡¡¡¡- FRF.8 FR/ATM Service Interworking
¡¡¡¡ ¡¡¡¡- FRF.8Plus
¡¡¡¡ ¡¡¡¡- Advanced FR/ATM Service Interworking capabilities
 MultiProtocol LAN encapsulation as per RFC-1483
 ATM DXI

Frame Relay
 UNI-U, UNI-N, NNI support
 Up to 4,000 active DLCIs
 Auto LMI detection
 LMI support: ITU-T Q.933 Annex-A, ANSI T1.617 Annex D, Frame Relay Forum and none
 RFC-1490 multiprotocol encapsulation
 Bandwidth management per DLCI: CIR, Be, Bc

Legacy
 X.25, HDLC
 Async (X.3, X.28)
 Bisync 3270
 SNA/SDLC

Network Management
 CXTool Configuration Tool
 CXView Network Monitoring
¡¡¡¡ ¡¡¡¡- Voice Billing, Frame Relay Billing
¡¡¡¡ ¡¡¡¡- Statistics gathering
 Support for SNMP management systems e.g., HP OpenView

VSAT
 Simplex LMI
 Split channel support
 Async termination into X.25 for telemetry or POS

High Quality Voice
 Support for VoIP, VoATM, VoFR
 Standard voice encoding covering a wide range of transmission rates
¡¡¡¡ ¡¡¡¡- G.729 A/B, G.726, G.711
 Voice encoding negotiation
 QoS with prioritization

Capacity
 Frame Relay switching performance of greater than 25,000 FPS using 64 byte frames
 Up to 60 digital voice channels
 2 ATM T1/E1 interfaces
 Up to 40 Serial Ports
 2 Digital Interface Modules (T1/E1, PRI)

Flexibility
 Modular architecture
 8-slot chassis accepts a wide variety of interface modules
 Feature-rich protocol support
 Common software platform

Integrated Wireless Services
 V.110 support enables Fax and Data applications to have wireless access to Internet services
 V.110 autodetect
 SS7support
 SMS (Short Message Service) support

Bandwidth Optimization
 SS7Spoofing feature reduces signaling overhead
 Reduced voice channel bandwidth
¡¡¡¡ ¡¡¡¡- Up to 8 to 1 ratio
 Reduced bandwidth requirement for 16 Kbps / 8 Kbps V.110 data at 4 to 1 / 8 to 1 ratios

TOP

Specifications

Hardware
Climax960 System

Standalone 8-slot chassis including 4 PCI slots

200MHz Motorola Power PC
603e RISC CPU
32 MB DRAM
4 MB FLASH

Console Port
Local TTY or Async PPP access;
2.4, 4.8, 9.6, 19.2, 38.4, 57.6
and 115.2Kbps, 8 bits, no parity

I/O Modules supported by the Climax960
Digital Interface Module
STEP (Secondary T1/E1 Processor)
SEM (Serial Expansion Module)
DVP (Digital Voice Processor)
5 per DIM
T1/E1 ATM Module
T3/E3 ATM Module
Dual Analog Voice Module
Interfaces - E&M 2/4-wire,
FXO, FXS
48V / Ring Generator
Serial Port Modules
Serial Port
Multi - I/O
Universal I/O
Ethernet 10BaseT Module
10/100 Ethernet PCI Module
Token Ring Module
T1/E1 CSU Module (RJ-48c, BNC)
ISDN BRI Voice Module (S/T)
V.34 Modem

 

Electrical

Power Supply
90 to 264VAC 50/60 Hz
110 W

Regulatory Approvals
Safety
UL1950
CSA 22.2 950
IEC 950
EN 60950
TS 001

EMC
FCC Part 15 Class A
EN 55022 Class A
AS 3548 Class A
EN 50082-1

Telecom
FCC Part 68
IC CS-03
CTR 2, 3, 4, 12, 13 and 21
TS 002, 003, 016, 031 and 038

Physical

Dimensions
4.38"H x 12.6"W x 13.12"D
(11.1 cm H x 32 cm W x 33.3 cm D) Weight

11.22 lbs (5.1 kg)

Environmental
Operating temperature
0°C to 45°C(32°F to 112°F)
Storage temperature
-40°C to 80°C(-40°F to 176°F)
Relative humidity
0 to 95% (non-condensing)

TOP

 

WHERE TO BUY  |  SITE MAP  |  CONTACT US
Copyright © 2005 Asce Networks, Inc. All Rights Reserved.