WHERE TO BUY  |   SITE MAP  |    CONTACT US  
 

    Ethernet 10BaseT Module

The Ethernet 10BaseT Module supports all major bridging and routing protocols ensuring interoperability in multivendor and multiprotocol environments.

The module is fully compliant with the IEEE 802.3 standard and supports all major bridging and routing protocols, ensuring interoperability in multivendor and multiprotocol environments.

The Climax900e supports one Ethernet 10BaseT module. The Climax950, Climax960 and Climax2000 can support up to two Ethernet 10BaseT modules.

Operational Features

  • Complies with RFC 1490 for encapsulation and fragmentation of LAN traffic in Frame Relay frames for transmission over Frame Relay networks, and RFC 1483 for ATM, both resulting in reduced costs and optimal use of bandwidth.
  • Compresses LAN traffic to reduce bandwidth requirements and improve response time.
  • Supports IP and IPX routing and transparent bridging of all non-routed protocols for maximum networking flexibility.
  • Supports static routing for IP protocol to enhance interoperability.
  • Fully SNMP-manageable using CXView, Asce Networks' Java-based management system for monitoring, statistics collection and billing information.
  • Configurable using Asce Networks' user friendly object-oriented graphical user interface, CXTool.

Specifications

Interfaces

  • RJ-45 modular female connector for 10BaseT connection
  • AUI for 10Base5
  • External transceiver required for 10Base2

Protocol support

  • Routes IP and IPX
  • Supports RIP, RIP2, OSPF, VRRP, ARP, RARP and LLC protocols
  • Transparent bridging
  • Spanning tree (802.1d) bridging
  • MAC layer bridging
  • Framing protocols
  • 802.3
  • DIX II
  • 802.2 SNAP

Physical
Dimensions
8¹" L x 2¸" W (20.3 cm L x 6 cm W)

 

Electrical
Power consumption
2.5 Watts

Environmental
Operating temperature
0°C to 45°C(32°F to 112°F)
Storage temperature
-40°C to 80°C(-40°F to 176°F )
Relative humidity
0 to 95% (non-condensing)

Agency Approvals
EMC
USA: FCC, Part 15
Canada: ICES-003, Issue 2, Rev. 1
EU: EMC Directive (EN55022:1995; EN 5082-1:1992)
Australia: AS/NZS 3548:1995
Safety
USA: UL 1950 3rd Edition
Canada: CSA C22.2 No. 950-95
EU: Low Voltage Directive (IEC950, 2nd Edition)
Australia: TS001:1993; AS/NZS 3260:1993

 

 
WHERE TO BUY  |  SITE MAP  |  CONTACT US
Copyright © 2005 Asce Networks, Inc. All Rights Reserved.